SOLO POLLUCE 25th DRYSUIT

Full-top in extra high density neoprene foams, thickness 2 mm with Supratex outer lining and reinforced peds in Kevlar® on shoulders. Slacks in Ferguson trilaminate, with Poliestere outer lining and reinforced peds in Cordura 1000 on knees and buttocks

SPRING HEELS

OMS Spring Heels can be worn with most fin types. OMS Spring Heels provide divers excellent fit and comfort and make the divers fins easy to put on and take off.

SOLO MILLITARY DRYSUIT

Meets the needs of technical diver who looks for independence and freedom of movement both inside and outside the water. The Solo Military is made with high quality materials: Trilaminate and, at areas of increased wear, 1000 denier.

QUICK NECK SYSTEM LATEX SEAL

Si tech quick neck system latex seal: It´s flexible, versatile and comfortable! It will keep your drysuit operational at all times! No more costly or time consuming repairs! It is the most effective solution in the market when it comes to sealing the neck area of protective suits. It is called Quick Neck and its developed to provide optimized operational values for the end-user. The Quick Neck is designed to be attached on diving drysuits, amphibious drysuits, rescue suits, watersports garments and more.

SOLO MG 25th DRYSUIT

Solo MG 25th Dry Suit is designed to combine the lightness of Nylon trilaminate with the independence guaranteed by the front entry zipper. Areas of increased wear are protected by Cordura® 1000 denier. The Solo MG 25th Dry Suit has been used by Michele Geraci during the "Solo-Dive" World Record (-212mt) and the "No-Limit" World Record attempt (-253mt).

QUICK NECK SYSTEM SILICONE SEAL

Si tech quick neck system latex seal: It´s flexible, versatile and comfortable! It will keep your drysuit operational at all times! No more costly or time consuming repairs! It is the most effective solution in the market when it comes to sealing the neck area of protective suits. It is called Quick Neck and its developed to provide optimized operational values for the end-user. The Quick Neck is designed to be attached on diving drysuits, amphibious drysuits, rescue suits, watersports garments and more.

ORUST NECK SYSTEM LATEX SEAL

sitech orust neck system latex seal: ORUST Neck System is the third generation of Neck System. An even softer and more flexible Modular Quick Change Solution for the neck! The design provides superb comfort and can be mounted in a great range of garments. The Neck Ring and the Lock Ring is made in a softer material and clips are added to keep the neck seal in place. Tool is no longer needed for installation of the neck seal; the seal and Lock Ring can easily be mounted into the PU-Ring by hand.

SOLO N DRYSUIT

The advantages of technical Drysuit, such as the front zip and the bellows that guarantee freedom of movement, combined with HD Neoprene thermal insulation and superb abrasion resistance of Supratex®

ORUST NECK SYSTEM SILICONE SEAL

sitech orust neck system silicone seal: ORUST Neck System is the third generation of Neck System. An even softer and more flexible Modular Quick Change Solution for the neck! The design provides superb comfort and can be mounted in a great range of garments. The Neck Ring and the Lock Ring is made in a softer material and clips are added to keep the neck seal in place. Tool is no longer needed for installation of the neck seal; the seal and Lock Ring can easily be mounted into the PU-Ring by hand.

SITECH BALANCED PEE VALVE

Use a Pee Valve and extend your bottom time. No use having loads of breathing gas when nature prevents you from concentrating. Long working hours and deco times are no longer a problem. Relieve yourself in a donned drysuit!

BASIC DIR HARNESS

This basic harness uses 25 feet of 2 inch nylon webbing material, 3 stainless steel D-rings with weight stops are included. Two at chest level and one on the waist. Easily repositioned for optimal configuration with an OMS Stainless Steel buckle. A 2 inch sewn crotch strap with a 2 inch Scooter “D” ring is also included. This harness is available to be installed on a diver’s backplate or on the OMS Aluminum or Stainless Steel backplates. Divers that prefer the simplest, most utilitarian harness generally choose this configuration. Available as a Kit or installed on OMS Backplates

TRIM WEIGHT POCKET

Designed to be mounted on 2 inch webbing, vertically or horizontally. Can be used on nylon tank bands to augment the divers trim.

POCKET W/ CARABINERS & CUT SYSTEM

Small if not necessary, big when has to be. Big Cordura 1000multi-compartments pocket to fasten to Side Mount back, thanks two double ended stainless steel snap links. Made to keep a low profile when empty, the pocket is furnished with scissors.

TRIESTE WING 94 LB TWIN

The Trieste Double Bladder Wings are designed for the diver that prefers a wing with a redundant bladder. The secondary bladder is designed to ensure proper buoyancy control in the event of primary bladder failure. Horseshoe style, redundant wings are the choice wing picked by divers that are not wearing a drysuit. The redundant bladder is utilized in the rare event that the primary bladder is rendered unusable. The power/oral inflator is the same on both bladders. Overpressure valves are located on the respective sides of each bladder.

PERFORMANCE WING 32 LB SINGLE

The Performance Mono Wing is a donut-style wing allowing quick and easy movement of air from one side of the air cell to the other. It also has stabilizing bars built into the wing to reduce tank shifting during the dive. This is the ideal wing for the traveling diver as it is small, lightweight and easy to pack. The Mono wing will fit onto the IQ pac, Aluminum or Stainless Steel Backplate using the Comfort harness II or Continuous weave (Dir) harness.

PERFORMANCE WING 45 LB DOUBLE

The Performance Double Wing is a donut-style wing allowing quick and easy movement of air from one side of the air cell to the other and is designed specifically for use with double tanks. Donut configuration allows air to travel from one side of the air cell to the other easily, this reduces the possibility of air trapping on one side of the wing.

TRIESTE WING 60 LB TWIN

The Trieste Double Bladder Wings are designed for the diver that prefers a wing with a redundant bladder. The secondary bladder is designed to ensure proper buoyancy control in the event of primary bladder failure. Horseshoe style, redundant wings are the choice wing picked by divers that are not wearing a drysuit. The redundant bladder is utilized in the rare event that the primary bladder is rendered unusable. The power/oral inflator is the same on both bladders. Overpressure valves are located on the respective sides of each bladder.